Saver Fans and Industrial fans in Furness, Cumbria, UK
SAVERFANS HAVE CLOSED,
NOW YOU CAN SAVE EVEN MORE BY SHOPPING DIRECT!
Moduflow fan systems supplied saverfans with most of their industrial fans.
Visit www.moduflow.co.uk or give us a call on 01229 835555
- BEST FANS
- BEST PRICES
- BEST DELIVERIES
- BEST SERVICE & BACKUP
- FREE CONSULTATION
NO ONE CAN TOUCH MODUFLOW FAN SYSTEMS
Moduflow Fan Type C
The Moduflow Type C ranges of variable discharge centrifugal fans are constructed with a rigid 2mm and 1.5mm galvanised steel case. The fan cases are fitted with circular spigot inlets, to accept spiral ducting. The discharge flange is pre-drilled. The fans are fitted with aluminium backward curved impellers. All motors are TEFC and have sealed for life bearings and class F insulation.
Download the Full Specification Sheet
Square Bifurcated Axial Fans
SQBIF square inline axial flow bifurcated fan manufactured from pre-galvanised sheet steel. Fan incorporates inlet and outlet flanges of Doby-type construction with 4 pre-drilled bolt holes. The motor is totally enclosed fan cooled and protected to IP55. Sealed-for-life ball bearings. The fan impeller blades are manufactured from either injection moulded glass re-enforced polypropylene or glass.
Download the Full Specification Sheet
Cylindrical Bifuricated Axial Fans
CYBIF Cylindrical inline axial flow bifurcated fan manufactured from pre-galvanised sheet steel. Fan incorporates inlet and outlet flanges with pre-drilled bolt holes. The motor is totally enclosed fan cooled and protected to IP55. Foot mounted B3 class F insulated. Sealed for life ball bearings. The fan impeller blades are manufactured from either injection moulded glass re-enforced polypropylene or glass.
Download the Full Specification Sheet
Square Mixed Flow
The SMF range of in line-square-cased mixed flow fans shall be constructed with a rigid steel frame. The frame shall be predrilled and finished in galvanised steel. The impeller shall be of high efficiency mixed flow design, manufactured in aluminium or high density polymer. The impeller shall be directly driven by a Ziehl Abegg rotor motor, featuring sealed for life bearings and class F insulation. A thermal contact is provided.
Download the Full Specification Sheet